Zundapp KS600 KS601 Tools at the Zundapp Fool

Cover	page 6 - Knock-out Puller, is used for the forcing-out of piston pins Gauging Pin, for the adjustment of connecting rods	page 12 - Knock-out, for flywheel Extractor Device, for crankshaft with rear bearing cover
page 1 - Title Page	page 7 - Extractor Device, for tappet guides Socket Wrench, for round nut on crankshaft	page 13 - Puller Device, for large roller bearing on crankshaft Holding Device, for rear wheel springing
page 2 - Blank	page 8 - Puller Device, for the small gear and the small roller bearing on the crankshaft Puller Device, for large gear on the crankshaft	page 14 - Blank
page 3 - Introduction	page 9 - Forcing-on Device, for the two gears and the small roller bearing onto the crankshaft Gripping Device, Socket Wrench 30mm, for camshaft when tightening and loosening the nut with socket wrench 30mm width of opening	page 15 - List of tools according to the order numbers
page 4 - Socket Wrench 17mm, for collar nut on cylinder head Valve Spring Clamp, for easier mounting and dismounting of the valves in the cylinder head	page 10 - Extractor Device, for front camshaft bearing Extractor Device, for rear camshaft bearing
page 5 - Knock-out Puller, for the valve guide bushings Socket Wrench 9mm, square width for the rotor screw of the generator	page 11 - Holding Device, for clutch Gripping Device, Socket Wrench 36mm, for flywheel when mounting or dismounting the clamping nut with socket wrench 36mm width of opening